| ISO |
International Organization for Standardization |
| |
|
| |
PO Box 56 |
| |
CH-1211 Geneve 20 |
| |
Switzerland |
| |
Tel (41) 22 749
01 11 - Fax (41) 22 733 34 30 |
| |
Web site:
www.iso.ch |
| |
|
| |
|
| 7.1 |
Pipe threads where
pressure-tight joints are made on the threads - dimensions, tolerances and
designation |
| 7.2 |
Pipe threads where
pressure-tight joints are made on the threads - verification by means of
limit gauges |
| 12 |
Aerospace -
pipelines - identification |
| 13 |
Grey iron pipes,
special castings and grey iron parts for pressure main lines |
| 64 |
Steel tubes-outside
diameters |
| 65 |
Steel tubes suitable
for screwing in accordance with ISO 7.1 |
| 559 |
Steel tubes for
water and sewage |
| 657 - 11 |
Hot rolled steel
sections - sloping flange channel sections (Metric series) - dimensions and
sectional properties |
| 657 - 13 |
Hot rolled steel
sections - tolerances on sloping flange beam, column and channel sections |
| 657 - 15 |
Hot rolled steel
sections - sloping flange beam sections (Metric series) - dimensions and
sectional properties |
| 657 - 16 |
Hot rolled steel
sections - sloping flange column sections (metric series) - dimensions and
sectional properties |
| 657 - 19 |
Hot rolled steel
sections - bulb flats (metric series) - dimensions, sectional properties and
tolerances |
| 657 - 21 |
Hot rolled steel
sections - T-sections with equal depth and flange width - dimensions |
| 1127 |
Stainless steel
tubes - dimensions, tolerances and conventional masses per unit length |
| 1129 |
Steel tubes for
boilers, superheaters and heat exchangers - dimensions, tolerances and
conventional masses per unit
length |
| 1459 |
Metallic coatings -
protection against corrosion by hot dip galvanizing - guiding principles |
| 1460 |
Metallic coatings -
hot dip galvanized coatings on ferrous materials - gravimetric determination
of the mass per unit area |
| 1461 |
Metallic coatings -
hot dip galvanized coatings on fabricated ferrous products - requirements |
| 2037 |
Stainless steel
tubes for the food industry |
| FDIS 2531 |
Ductile iron pipes,
fittings, accessories and their joints for water or gas applications |
| 2531 |
Ductile iron pipes,
fittings, accessories for pressure pipelines |
| 2604 - 1 to 8 |
Steel products for
pressure purposes - quality requirements |
| 2604 - 1 |
Steel products for
pressure purposes - quality requirements - forging |
| 2604 - 5 |
Steel products for
pressure purposes - quality requirements - longitudinally welded austenitic
stainless steel |
| 2604 - 6 |
Steel products for
pressure purposes - quality requirements - submerged arc longitudinally or
spirally weldedsteel tubes |
| 2937 |
Plain end seamless
steel tubes for mechanical application |
| 2938 |
Hollow steel bars
for machining |
| 3138 |
Anhydrous hydrogen
fluoride for industrial use - determination of non volatile acid content -
titrimetric method |
| 3183 - 1 |
Petroleum and
natural gas industries - steel pipe for pipelines - technical delivery
conditions - pipes of requirement class A |
| 3183 - 2 |
Petroleum and
natural gas industries - steel pipe for pipelines - technical delivery
conditions - pipes of requirements class B |
| 3183 - 3 |
Petroleum and
natural gas industries - steel pipe for pipelines - technical delivery
conditions - pipes of requirement class C |
| 3304 |
Plain end seamless
precision steel tubes - technical conditions for delivery |
| 3305 |
Plain end welded
precision steel tubes - technical conditions for delivery |
| 3306 |
Plain end as welded
and sized precision steel tubes - technical conditions for delivery |
| 3545 - 1/2/3 |
Steel tubes and
fittings - symbols for use in specifications |
| 3545 - 1 |
Steel tubes and
fittings - symbols for use in specifications - tubes and tubular accessories
with circular cross section |
| 3545 - 2 |
Steel tubes and
fittings - symbols for use in specifications - square and rectangular hollow
sections |
| 3545 - 3 |
Steel tubes and
fittings - symbols for use in specifications - tubular fittings with
circular cross-section |
| 4019 |
Cold finished steel
structural hollow sections - dimensions and sectional properties |
| 4179 |
Ductile iron pipes
for pressure and non-pressure pipelines - centrifugal cement mortar lining -
general requirements |
| 4200 |
Plain end steel
tubes, welded and seamless - general tables of dimensions and masses per
unit length |
| 4394 - 1 |
Fluid power systems
and components - cylinder barrels - requirements for steel tubes with
specially finished bores |
| 5252 |
Steel tubes -
tolerance systems |
| 5256 |
Steel pipes and
fittings for buried or submerged pipe lines - external and internal coating
by bitumen or coal tar derived
materials |
| 6537 |
Pneumatic fluid
power systems - cylinder barrels - requirements for non-ferrous metallic
tubes |
| 6594 |
Cast iron drainage
pipes and fittings - spigot series |
| 6600 |
Ductile iron pipes -
centrifugal cement mortar lining - composition controls of freshly applied
mortar |
| 6758 |
Welded steel tubes
for heat exchangers |
| 6759 |
Seamless steel tubes
for heat exchangers |
| 6761 |
Steel tubes -
preparation of ends of tubes and fittings for welding |
| 6932 |
Cold reduced carbon
steel strip with a maximum carbon content of 0,25 % |
| 6954 |
Cast iron drainage
pipes and fittings - spigot series |
| 7186 |
Ductile iron
products for sewage applications |
| 7598 |
Stainless steel
tubes suitable for screwing in accordance with ISO 7-1 |
| 8179 - 1 |
Ductile iron pipes -
external zinc coating - metallic zinc with finishing layer |
| 8179 - 2 |
Ductile iron pipes -
external zinc coating - zinc rich paint with finishing layer |
| 8180 |
Ductile iron pipes -
polyethylene sleeving |
| 8496 |
Metallic materials -
tubes - ring tensile test |
| 8535 |
Compression-ignition
engines - steel tubes for high-pressure fuel injection pipes |
| 8535 - 1 |
Compression-ignition
engines - steel tubes for high-pressure fuel injection pipes - requirements
for seamless cold-drawn
single-wall tubes |
| 9095 |
Steel tubes -
continuous character marking and colour coding for material identification |
| 9302 |
Seamless and welded
(except submerged arc-welded) steel tubes for pressure purposes -
electromagnetic testing for
verification of hydraulic leak-tightness |
| 9303 |
Seamless and welded
(except submerged arc-welded) steel tubes for pressure purposes - full
peripheral ultrasonic testing
for the detection of longitudinal imperfections |
| 9304 |
Seamless and welded
(except submerged arc-welded) steel tubes for pressure purposes - eddy
current testing for the
detection of imperfections |
| 9305 |
Seamless steel tubes
for pressure purposes - full peripheral ultrasonic testing for the detection
of transverse imperfections |
| 9329 - 1/2/3/4 |
Seamless steel tubes
for pressure purposes - technical delivery conditions |
| 9329 - 1 |
Seamless steel tubes
for pressure purposes - technical delivery conditions - unalloyed steels
with specified room temperature
properties |
| 9329 - 2 |
Seamless steel tubes
for pressure purposes - technical delivery conditions - unalloyed and
alloyed steel with |
| |
specified elevated
temperature properties |
| 9329 - 3 |
Seamless steel tubes
for pressure purposes - technical delivery conditions - unalloyed and
alloyed steels with specified low
temperature properties |
| 9329 - 4 |
Seamless steel tubes
for pressure purposes - technical delivery conditions - austenitic stainless
steels |
| 9330 - 1/2/3/4/ |
Welded steel tubes
for pressure purposes - technical delivery conditions |
| 9330 - 1 |
Welded steel tubes
for pressure purposes - technical delivery conditions - unalloyed steel
tubes with specified room
temperature properties |
| 9330 - 2 |
Welded steel tubes
for pressure purposes - technical delivery conditions - electric resistance
and induction welded unalloyed and
alloyed steel tubes with specified elevated temperature properties |
| 9330 - 3 |
Welded steel tubes
for pressure purposes - technical delivery conditions - electric resistance
and induction welded unalloyed and
alloyed steel tubes with specified low temperature properties |
| 9330 - 4 |
Welded steel tubes
for pressure purposes - technical delivery conditions - submerged arc-welded
unalloyed and alloyed steel
tubes with specified elevated temperature properties (Partial revision of
ISO 2604-6:1978) |
| 9330 - 5 |
Welded steel tubes
for pressure purposes - technical delivery conditions - submerged arc-welded
unalloyed and alloyed steel
tubes with specified low temperature properties (Partial revision of ISO
2604-6:1978) |
| 9330 - 6 |
Welded steel tubes
for pressure purposes - technical delivery conditions - longitudinally
welded austeniticstainless steel
tubes |
| 9402 |
Seamless and welded
(except submerged arc-welded) steel tubes for pressure purposes - full
peripheral magnetic
transducer/flux leakage testing of ferromagnetic steel tubes for the
detection of longitudinal imperfections |
| 9598 |
Seamless steel tubes
for pressure purposes - full peripheral magnetic transducer/flux leakage
testing offerromagnetic steel
tubes for the detection of transverse imperfections |
| 9626 |
|
| 9764 |
Electric resistance
and induction welded steel tubes for pressure purposes - ultrasonic testing
of the weld seam for the
detection of longitudinal imperfections |
| 9765 |
Submerged arc-welded
steel tubes for pressure purposes - ultrasonic testing of the weld seam for
the detection of
longitudinal and/or transverse imperfections |
| 10124 |
Seamless and welded
(except submerged arc-welded) steel tubes for pressure purposes - ultrasonic
testing for the detection of
laminar imperfections |
| 10332 |
Seamless and welded
(except submerged arc-welded) steel tubes for pressure purposes - ultrasonic
testing for the verification
of hydraulic leak-tightness |
| 10543 |
Seamless and
hot-stretch-reduced welded steel tubes for pressure purposes - full
peripheral ultrasonic thickness testing |
| 10763 |
Hydraulic fluid
power - plain-end, seamless and welded precision steel tubes - dimensions
and nominal working pressures |
| 10803 |
Design method for
ductile iron pipes |
| 11484 |
Steel tubes for
pressure purposes - qualification and certification of non-destructive
testing (NDT) personnel |
| 11496 |
Seamless and welded
steel tubes for pressure purposes - ultrasonic testing of tube ends for the
detection laminar
imperfections |
| 11960 |
Steel pipes for use
as casing or tubing for wells - petroleum and natural gas industries |
| 11961 |
Petroleum and
natural gas industries - steel pipes for use as drill pipe - specification |
| 12094 |
Welded steel tubes
for pressure purposes - ultrasonic testing for the detection of laminar
imperfections in strips/plates used
in the manufacture of welded tubes |
| 12095 |
Seamless and welded
steel tubes for pressure purposes - liquid penetrant testing |
| 12096 |
Submerged arc-welded
steel tubes for pressure purposes - radiographic testing of the weld seam
for the detection of
imperfections |
| 13663 |
Welded steel tubes
for pressure purposes - ultrasonic testing of the area adjacent to the weld
seam for the detection of laminar
imperfections |
| 13664 |
Seamless and welded
steel tubes for pressure purposes - magnetic particle inspection of the tube
ends for the detection of
laminar imperfections |
| 13665 |
Seamless and welded
steel tubes for pressure purposes - magnetic particle inspection of the tube
body for the detection of
surface imperfections |
| |
|