JIS G3302

JIS G3302

Classification Designation For G.I	Yield Point Minimum	Tensile Sirength Minimum	Elongation % minimum				Application
Classification Designation For G.I	Yield Point Minimum	Tensile Sirength Minimum	Nominal Thickness mm(t)
	MPa	MPa	0.25< t < 0.40	0.40< t < 0.06	0.06<t<1.00	1.00<t<1.20
SGCC	-	-	-	-	-	-	Commercial
SGCH	-	-	-	-	-	-	Commercial Hard
SGCD1	-	270	-	34	36	37	Drawing
SGC340	245	340	20	20	20	20	Structural
SGC400	295	400	18	18	18	18
SGC440	335	440	18	18	18	18
SGC490	365	490	16	16	16	16
SGC570	560	570	-	-	-	-