Light I beams IPEAA

Warunki techniczne HK; Technical term HK; Technische Bedingungen HK-WT/-JD/5.003
Designation Dimensions [mm] Sectional
area
Mass of
1m
Statical values
  H B t1 t2 R [cm2] [kg] lx ly Wx Wy
cm4 cm3
IPE 80AA 78,0 46 3,20 4,20 5 6,31 4,95 64,1 6,85 16,44 2,98
IPE 100AA 97,6 55,00 3,60 4,50 7,00 8,56 6,72 136 12,6 27,9 4,57
IPE 120AA 117,0 64,00 3,80 4,80 7,00 10,65 8,36 244 21,1 41,7 6,59
IPE 140AA 136,6 73,00 3,80 5,20 7,00 12,81 10,05 407 33,8 59,7 9,27
IPE 160AA 156,4 82,00 4,00 5,60 9,00 15,69 12,31 659 51,7 84,3 12,60
IPE 180AA 176,4 91,00 4,30 6,20 9,00 19,03 14,94 1020 78,1 116,0 17,20
IPE 200AA 196,4 100,00 4,50 6,70 12,00 22,87 17,95 1530 112,0 156,0 22,40
IPE 220AA 216,4 110,00 4,70 7,40 12,00 26,99 21,19 2220 165,0 205,0 29,90
IPE 240AA 236,4 120,00 4,80 8,00 15,00 31,71 24,89 3150 230,0 267,0 38,60
Manufacturing technical terms according to DIN EN 10025 1991

 

If you are no member yet, please fill registration form
(basic fee AED 1000/- or USD 275/- year only)
MEsteel.com, contact address : P.O.Box 57040, Dubai, United Arab Emirates,  info@mesteel.com , Tel:+971-4-3494995 Fax:+971-4-3494997

 

 
Copyright © 2000 mesteel.com. All rights reserved. Read Our Disclaimer