BS 970 : specification for wrought steels for mechanical and allied engineering purposes
BS 1449 : steel plate, sheet and strip (many sections)
(nb: several sections withdrawn and replaced by bs ens)
BS 1501 : steels for pressure purposes : plates
Part 3 : 1990 : specification for corrosion and heat-resisting steels
BS 1502 : 1982 (1990) : specification for steels for fired and unfired pressure vessels : sections and bars
BS 1639 : 1964 (1997) : methods for bend testing of metals
BS 4360 : specification for weldable structural steels
(withdrawn. Replaced by bs 7668 : 1994, bs en 10029 : 1991, parts 1-3 of bs en 10113 : 1993, bs en 10137 : 1996, bs en 10155 : 1993 and bs en 10210-1 : 1994).
BS 5996 : 1993 : specification for acceptance levels for internal imperfections in steel plate, strip and wide flats, based on ultrasonic testing
BS 7191 : 1989 : specification for weldable structural steels for fixed offshore structures
BS 7668 : 1994 : specification for weldable structural steels. Hot finished structural hollow sections in weather resistant steels
BS EN 10002 : tensile testing of metallic materials
BS EN 10002-1 : 1990 : method of test at ambient temperature
BS EN 10020 : 1991 : definition and classification of grades of steel
BS EN 10021 : 1993 : general technical delivery requirements for steel and iron products
BS EN 10025 : 1993 : hot-rolled products of non-alloy structural steels : technical delivery conditions
BS EN 10027 : designation systems for steel
BS EN 10027-1 : 1992 : steel names, principal symbols
BS EN 10027-2 : 1992 : steel numbers
(see also dd 214)
BS EN 10028 : flat products made of steels for pressure purposes
BS EN 10028-1 : 1993 : general requirements
BS EN 10028-2 : 1993 : non alloy and alloy steels with specified elevated temperature properties
BS EN 10028-3 : 1993 : weldable fine grain steels, normalized
BS EN 10028-4 : 1995 : nickel alloy steels with specified low temperature properties
BS EN 10028-5 : 1997 : weldable fine grain steels, thermo mechanically rolled
BS EN 10028-6 : 1997 : weldable fine grain steels, quenched and tempered
BS EN 10045 : Charpy impact test on metallic materials
BS EN 10045-1 : 1990 : test method (v- and u- notches)
BS EN 10048 : 1997 : hot rolled narrow steel strip : tolerances on dimensions and shape
BS EN 10079 : 1993 : definition of steel products
BS EN 10113 : hot-rolled products in weldable fine grain structural steels
BS EN 10113-1 : 1993 : general delivery conditions
BS EN 10113-2 : 1993 : delivery conditions for normalized / normalized rolled steels
BS EN 10113-3 : 1993 : delivery conditions for thermo mechanical rolled steels
BS EN 10137 : plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions
BS EN 10137-1 : 1996 : general delivery conditions
BS EN 10137-2 : 1996 : quenched and tempered steels
BS EN 10137-3 : 1996 : precipitation hardened steels
BS EN 10155 : 1993 : structural steels with improved atmospheric corrosion resistance. Technical delivery conditions
BS EN 10164 : 1993 : steel products with improved deformation properties perpendicular to the surface of the product : technical delivery conditions
BS EN 10204 : 1991 : metallic products : types of inspection documents
BS EN 10210-1 : 1994 : hot finished structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements
BS EN 10219-1 : 1997 : cold formed structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements
BS EN 10248-1 : 1996 : hot rolled sheet piling of non alloy steels : technical delivery conditions
BS EN 10249 -1 : 1996 : cold formed sheet piling of non alloy steels : technical delivery conditions
Cr 10260 - see dd214
Dd 214 : 1993 (cen report cr 10260 : eciss information circular ic10) : designation systems for steel : additional symbols for steel names
BS 4 : part 1 : 1993 : structural steel sections. Specification for hot-rolled sections
BS 4848 : hot rolled structural steel sections
Part 4 : 1972(1986) : equal and unequal angles
BS EN 10024 : 1995 : hot rolled taper flange I sections : tolerances on shape and dimensions
BS EN 10029 : 1991 : tolerances on dimensions, shape and mass for hot rolled steel plates 3mm thick or above
BS EN 10034 : 1993 : structural steel I and h sections : tolerances on shape and dimensions
BS EN 10051 : 1992 + a1 : 1997 : specification for continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels. Tolerances on dimensions and shape (including amendment a1 : 1997)
BS EN 10055 : 1996 : hot rolled steel equal flange tees with radiused root and toes : dimensions and tolerances on shape and dimensions
BS EN 10056-2 : 1993 : specification for structural steel equal and unequal angles : tolerances on shape and dimensions
BS EN 10067 : 1997 : hot rolled bulb flats : dimensions and tolerances on shape, dimensions and mass
BS EN 10163 : specification for delivery requirements for surface conditions of hot-rolled steel plates, wide flats and sections
BS EN 10163-1 : 1991 : general requirements
BS EN 10163-2 : 1991 : plates and wide flats
BS EN 10163-3 : 1991 : sections
BS EN 10210-2 : 1997 : hot finished structural hollow sections of non-alloy and fine grain structural steels. Tolerances, dimensions and sectional properties
BS EN 10219-2 : 1997 : cold formed structural hollow sections of non-alloy and fine grain structural steels. Tolerances, dimensions and sectional properties
BS EN 10248-2 : 1996 : hot rolled sheet piling of non alloy steels : tolerances on shape and dimensions
BS EN 10249-2 : 1996 : cold formed sheet piling of non alloy steels : tolerances on shape and dimensions
Euronorm 91 : 1981 : hot-rolled wide flats : tolerances on dimensions, shape and mass
BS 1449 : steel plate, sheet and strip
Section 1.9 : 1991 : specification for cold rolled narrow strip based on formability
BS 2994 : 1976 (1987) : specification for cold rolled steel sections
BS 5950 : structural use of steelwork in buildings
Part 5 : 1987 : code of practice for the design of cold rolled sections
Part 6 : 1995 : code of practice for design of light gauge profiled steel sheeting
Part 7 : 1992 : specification for materials and workmanship : cold formed sections
Part 9 : 1994 : code of practice for stressed skin design
BS EN 10048 : 1997 : hot rolled narrow steel strip : tolerances on dimensions and shape
BS EN 10130 : 1991 : cold rolled low carbon steel flat products for cold forming : technical delivery conditions
BS EN 10131 : 1991 : cold rolled uncoated low carbon and high yield strength steel flat products for cold forming
BS EN 10140 : 1997 : cold rolled narrow steel strip : tolerances on dimensions and shape
BS EN 10142 : 1991 + a1 : 1995 : continuously hot-dip zinc coated low carbon steel sheet and strip for cold forming : technical delivery conditions (including amendment a1 : 1995)
BS EN 10143 : 1993 : continuously hot dip metal coated steel sheet and strip : tolerances on dimensions and shape
BS EN 10147 : 1992 + a1 : 1995 : continuously hot-dip zinc coated structural steel sheet and strip : technical delivery conditions (including amendment a1 : 1995)
BS EN 10149 : hot rolled flat products made of high yield strength steels for cold forming
BS EN 10149-1 : 1996 : general delivery conditions
BS EN 10149-2 : 1996 : delivery conditions for thermo mechanically rolled steels
BS EN 10149-3 : 1996 : delivery conditions for normalized or normalized rolled steels
BS EN 10169 : continuously organic coated (coil coated) steel flat products
BS EN 10169-1 : 1997 : general information (definitions, materials, tolerances, test methods)
BS EN 10214 : 1995 : continuously hot-dip zinc-aluminium (za) coated steel strip and sheet : technical delivery conditions
BS EN 10215 : 1995 : continuously hot-dip aluminium-zinc (az) coated steel strip and sheet : technical delivery conditions
BS EN 10238 : 1997 : automatically blast cleaned and automatically primed structural steel products
Iso 4995 : 1993 : hot rolled steel sheet of structural quality
Iso 4997 : 1991 : cold reduced steel sheet of structural quality
Iso 5951 : 1993 : hot rolled steel sheet of higher yield strength with improved formability
Iso 6316 : 1993 : hot rolled steel strip of structural quality
BS 3100 : 1991 : specification for steel castings for general engineering purposes
BS 4080 : specification for severity levels for discontinuities in steel castings
Part 2 : 1989 : surface discontinuities revealed by penetrant flaw detection
BS 4570 : 1985 : specification for fusion welding of castings
BS 4670 : 1971 (1987) : specification for alloy steel forgings
BS 6208 : 1990 : method for ultrasonic testing of ferritic steel castings including quality levels
BS 6615 : 1996 : specification for dimensional tolerances for metal and metal alloy castings
BS EN 1369 : 1997 : founding : magnetic particle inspection
BS EN 1560 : 1997 : founding : designation system for cast iron : material symbols and material number
BS EN 1561 : 1997 : founding : grey cast irons
BS EN 1563 : 1997 : founding : spheroidal graphite cast irons
BS EN 1564 : 1997 : founding : austempered ductile cast irons
BS EN 10213 : technical delivery conditions for steel castings for pressure purposes
BS EN 10213-1 : 1996 : general
BS EN 10213-2 : 1996 : steel grades for use at room temperature and at elevated temperatures
BS EN 10213-3 : 1996 : steels for use at low temperatures
BS EN 10213-4 : 1996 : austenitic and austenitic-ferritic steel grades
BS 405 : 1987 : specification for uncoated expanded metal carbon steel sheets for general purposes
BS 1091 : 1963 (obsolescent) : specification for pressed steel gutters, rainwater pipes, fittings and accessories (superseded in part or entirely by bs en 1462 : 1997)
BS 1245 :1975 (1986) : specification for metal door frames (steel)
BS 1494 : specification for fixing accessories for building purposes
Part 1 : 1964 : fixings for sheet, roof and wall coverings
BS 2994 : 1976(1987) : specification for cold rolled steel sections
BS 4592 : industrial type flooring, walkways and stair treads
Part 1 : 1995 : specification for open bar gratings
Part 2 : 1987 (1994) : specification for expanded metal grating panels
Part 3 : 1987 : specification for cold formed planks
Part 5 : 1995 : specification for solid plates in steel, aluminium and glass reinforced plastics
BS 4904 : 1978 (1997) : specification for external cladding colors for building purposes
BS 5234 : partitions, including matching linings
Part 1 : 1992 : code of practice for design and installations
BS 5427 : code of practice for the use of profiled sheet for roof and wall cladding on buildings
Part 1 : 1996 : design
BS 5977 : lintels
Part 2 : 1983 : specification for prefabricated lintels
BS 6510 : 1984 : specification for steel windows, sills, window boards and doors
BS EN 1462 : 1997 : brackets for eaves gutters : requirements and testing
Reinforcement etc.
BS 4449 : 1997 : specification for carbon steel bars for the reinforcement of concrete
BS 4466 : 1989 : specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS 4482 : 1985 : specification for cold reduced steel wire for the reinforcement of concrete
BS 4483 : 1985 : specification for steel fabric for the reinforcement of concrete
BS 4486 : 1980 : specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the pre-stressing of concrete
BS 5896 : 1980 : specification for high tensile steel wire and strand for the pre-stressing of concrete
BS 6744 : 1986 : specification for austenitic stainless bars for the reinforcement of concrete
BS 7123 : 1989 : specification for metal arc welding of steel for concrete reinforcement
BS 7295 : fusion bonded epoxy coated carbon steel bars for the reinforcement of concrete
Part 1 : 1990 : specification for coated bars
Part 2 : 1990 : specification for coatings
BS 499 : welding terms and symbols
Part 1 : 1991 : glossary for welding, brazing and thermal cutting
BS EN 719 : 1994 : welding co-ordination. Tasks and responsibilities
BS EN 729 : quality requirements for welding. Fusion welding of metallic materials
BS EN 729-1 : 1995 : guidelines for selection and use
BS EN 729-2 : 1995 : comprehensive quality requirements
BS EN 729-3 : 1995 : standard quality requirements
BS EN 729-4 : 1995 : elementary quality requirements
BS EN 24063 : 1992 : welding, brazing , soldering and braze welding of metals : nomenclature of processes and reference numbers for symbolic representation on drawings
BS EN 29692 : 1994 : specification for metal-arc welding with covered electrode , gas shielded metal arc-welding and gas welding. Joint preparation for steel
BS 4515 : 1996 : specification for welding of steel pipelines on land and offshore
BS 4570 : 1985 : fusion welding of steel castings
BS 5135 : 1984 : specification for arc welding of carbon and carbon manganese steels
BS 5465 : 1987 : specification for electrodes and fluxes for the submerged arc welding of austenitic stainless steels
BS 7084 : 1989 : specification for carbon and carbon-manganese steel tubular cored welding electrodes
BS 7123 : 1989 : specification for metal arc welding of steel for concrete reinforcement
BS 7475 : 1991 : specification for fusion welding of austenitic stainless steels
BS EN 440 : 1995 : welding consumables : wire electrodes and deposits for gas shielded metal arc welding of non-alloy and fine grain steels : classification
BS EN 499 : 1995 : welding consumables : covered electrodes for manual metal arc welding of non alloy and fine grain steels : classification
BS EN 756 : 1996 : welding consumables : wire electrodes and wire-flux combinations for submerged arc welding of non-alloy and fine grain steels : classification
BS EN 757 : 1997 : welding consumables : covered electrodes for manual metal arc welding of high strength steels : classification
BS EN 758 : 1997 : welding consumables : tubular cored electrodes for metal arc welding with and without a gas shield of non-alloy and fine grain steels : classification
BS EN 759 : 1997 : welding consumables : technical delivery conditions for welding filler metals : types of product, dimensions, tolerances and marking
BS EN 760 : 1996 : welding consumables : fluxes for submerged arc welding : classification
BS 709 : 1983 : methods of destructive testing fusion welded joints and weld metal in steel
BS 2600 : radiographic examination of fusion welded butt joints in steel
Part 1 : 1983 : methods for steel 2mm up to and including 50m thick
Part 2 : 1973 : methods for steel over 50mm up to and including 200mm thick
BS 2704 : 1978(1983) : specification for calibration blocks for use in ultrasonic flaw detection blocks for use in ultrasonic flaw detection
BS 2910 : 1986 : methods for radiographic examination of fusion welded circumferential butt joints in steel pipes
BS 3683 : glossary of terms used in non-destructive testing
Part 2 : 1985 : magnetic particle flaw detection
Part 3 : 1984 : radiological flaw detection
Part 4 : 1985 : ultrasonic flaw detection
BS 3923 : methods for ultrasonic examination of welds
Part 1 : 1986 : methods for manual examination of fusion welds in ferritic steels
BS 4872 : specification for approval testing of welders when welding procedure approval is not required
Part 1 : 1982 (1995) : fusion welding of steel
Part 2 : 1972 : automatic examination of fusion welded butt joints in ferritic steels
BS 6072 : 1981(1986) : method for magnetic particle flaw detection
BS 7339 : 1990 : code of practice for supplementary checking of metallic materials of construction in pressurized systems
BS EN 287 : approval testing of welders for fusion welding
BS EN 287-1 : 1992 : steels
BS EN 288 : specification and approval of welding procedures for metallic materials
BS EN 288-1 : 1992 : general rules for fusion welding
BS EN 288-2 : 1992 : welding procedure specification for arc welding
BS EN 288-3 : 1992 : welding procedure tests for the arc welding of steels
BS EN 288-5 : 1995 : approval by using approved welding consumables for arc welding
BS EN 288-6 : 1995 : approval related to previous experience
BS EN 288-7 : 1995 : approval by a standard welding procedure for arc welding
BS EN 288-8 : 1995 : approval by a pre-production welding test
BS EN 970 : 1997 : non-destructive examination of fusion welds : visual examination
BS EN 25817 : 1992 : arc-welded joints in steel : guidance on quality levels for imperfections
Pd 6493 : 1991 : guidance on methods for assessing the acceptability of flaws in fusion welded structures
BS 1494 : specification for fixing accessories for building services
Part 1 : 1964 : fixings for sheet, roof and wall coverings
BS 3692 : 1967 (obsolescent) : specification for iso metric precision hexagon bolts, screws and nuts : metric units
BS 4190 : 1967 (obsolescent) : specification for iso metric black hexagon bolts, screws and nuts
BS 4320 : 1968 : specification for metal washers for general engineering purposes. Metric series
BS 4395 : specification for high strength friction grip bolts and associated nuts and washers for structural engineering
Part 1 : 1969 : general grade
Part 2 : 1969 : higher grade bolts and nuts and general grade washers
BS 4604 : specification for the use of high strength friction grip bolts in structural steelwork. Metric series
Part 1 : 1970 : general grade
Part 2 : 1970 : higher grade (parallel shank)
BS 4620 : 1970 (1988) : specification for rivets for general engineering purposes
BS 4882 : 1990 : specification for bolting for flanges and pressure containing purposes
BS 4933 : 1973 (obsolescent) : specification for iso metric black cap and countersunk head bolts and screws with hexagonal nuts
BS 6105 : 1981 : specification for corrosion-resistant stainless steel fasteners
BS 7419 : 1991 : specification for holding down bolts
BS 7644 : direct tension indicators
Part 1 : 1993 : specification for compressible washers
Part 2 : 1993 : specification for nut face and bolt face washers
BS EN 20898 : mechanical properties of fasteners
BS EN 20898-1 : 1992 : bolts, screws and studs
BS EN 20898-2 : 1994 : nuts with specified proof load values - coarse thread
BS EN 24014 : 1992 : hexagon head bolts : product grades a and b
BS EN 24016 : 1992 : hexagon head bolts : product grade c
BS EN 24017 : 1992 : hexagon head screws : product grades a and b
BS EN 24018 : 1992 : hexagon head screws : product grade c
BS EN 24032 : 1992 : hexagon nuts, style 1 : products grades a and b
BS EN 24033 : 1992 : hexagon nuts, style 2 : product grades a and b
BS EN 24034 : 1992 : hexagon nuts : product grade c
BS 476 : fire tests on building materials and structures
Part 20 : 1987 : method for determination of the fire resistance of elements of construction (general principles)
Part 21 : 1987 : methods for determination of the fire resistance of load bearing elements of construction
Part 22 : 1987 : methods for determination of the fire resistance of non-load bearing elements of construction
Part 23 : 1987 : methods for determination of the contribution of components to the fire resistance of a structure
BS 5950 : structural use of steelwork in building
Part 8 : 1990 : code of practice for fire resistant design
BS 8202 : coatings for fire protection of building elements
Part 1 : 1995 : code of practice for the selection and installation of sprayed mineral coatings
Part 2 : 1992 : code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance
BS 729 : 1971 (1994) : specification for hot dip galvanized coatings on iron and steel articles
BS 1706 : 1990 (1996) : method for specifying electroplated coatings of zinc and cadmium on iron and steel
BS 2523 : 1983 (obsolescent) : specification for lead-based priming paints
BS 2569 : specification for sprayed coatings
Part 2 : 1965 (1997) : protection of iron and steel against corrosion and oxidation at elevated temperatures
BS 3698 : 1964 (1979) (obsolescent) : specification for calcium plumbate priming paints
BS 3900 : methods of test for paints
Part f11 : 1985 (1991) : determination of resistance to cathodic disbonding of coatings for use on land-based buried structures
Part f13 : 1986 (1991) : filiform corrosion test on steel
(also numbered bs en iso 4263 : 1995)
Part h3 : 1983 (1989) : designation of degree of rusting
BS 4147 : 1980(1987) : specification for bitumen based hot-applied coating materials for protecting iron and steel, including suitable primers where required
BS 4164 : 1987 : specification for coal-tar based hot-applied coating materials for iron and steel, including a suitable primer
BS 4652 : 1995 : specification for metallic zinc-rich priming paints (organic media)
BS 4921 : 1988 (1994) : specification for sherardized coatings on iron or steel
BS 5411 : methods of test for metallic and related coatings (parts 1-16)
(parts 1-5, 7, 9-16 renumbered in bs en iso series)
BS 5466 : methods for corrosion testing of metallic coatings (parts 4-9)
(parts 4-6, 8-9 renumbered in bs en iso series)
BS 5493 : 1977 : code of practice for protective coating of iron and steel structures against corrosion
BS 7079 : preparation of steel substrates before application of paints and related products
Group c : surface roughness characteristics of blast-cleaned steel substrates
(renumbered in bs en iso 8503 series)
BS 7361 : cathodic protection
Part 1 : 1991 : code of practice for land and marine applications
BS 7479 : 1991 : method of salt spray corrosion tests in artificial atmospheres
BS EN 22063 : 1994 : metallic and other inorganic coatings : thermal spraying : zinc, aluminium and their alloys
Iso 1461: 1973 : metallic coatings : hot dip galvanized coatings on fabricated ferrous products : requirements
Iso 8501 : preparation of steel substrates before application of paints and related products : visual assessment of surface cleanliness
Part 1 : 1988 : rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings preparation grades after removal of previous coatings
Iso 8503 : preparation of steel substrates before application of paints and related products : surface roughness characteristics of blast cleaned steel substrates
Part 1 : 1988 : specifications and definitions for iso surface profile comparators for the assessment of abrasive blast cleaned surfaces
Pd 6484 : 1979 (1990) : commentary on corrosion at bimetallic contacts and its alleviation
BS 5400 : steel concrete and composite bridges
Part 2 : 1978 : specification for loads
BS 6399 : loading for buildings
Part 1 : 1996 : code of practice for dead and imposed loads
Part 2 : 1997 : code of practice for wind loads
Part 3 : 1988 : code of practice for imposed roof loads
BS 8100 : lattice towers and masts
Part 1 : 1986 : code of practice for loading
CP3 : code of basic data for the design of buildings
Chapter v : part 2 : 1972 : wind loads
(replaced by BS 6399 : part 2 : 1997, but remains current so as to allow an overlap period)
DD ENV1991 : eurocode 1 : basis of design and actions on structures
DD ENV1991-2-2 : 1996 : actions on structures exposed to fire (together with uk nad)
DD ENV1991-2-3 : 1996 : actions on structures : snow loads
DD ENV1991-2-4 : 1997actions on structures : wind actions (together with uk nad)
DD ENV1991-4 : 1996 : actions in silos and tanks
BS 449 : specification for the use of structural steel in building
Part 2 : 1969 : metric units
BS 2573 : rules for the design of cranes
Part 1 : 1983 : specification for classification, stress calculations and design criteria for structures
BS 2853 : 1957 : specification for the design and testing of steel overhead runway beams
BS 4076 : 1989 : specification for steel chimneys
BS 4211 : 1994 : specification for ladders for permanent access to chimneys, other high structures, silos and bins
BS 5395 : stairs, ladders and walkways
Part 1 : 1977(1984) : code of practice for the design of straight stairs
Part 2 : 1984 : code of practice for the design of helical and spiral stairs
Part 3 : 1985 : code of practice for the design of industrial type stairs, permanent ladders and walkways
BS 5400 : steel, concrete and composite bridges
Part 3 : 1982 : code of practice for design of steel bridges
Part 5 : 1979 : code of practice for design of composite bridges
Part 9 : 1983 : bridge bearings
Part 10 : 1980 : code of practice for fatigue
BS 5427 : code of practice for the use of profiled sheet for roof and wall cladding on buildings
Part 1 : 1996 : design
BS 5500 : 1997 : specification for unfired fusion welded pressure vessels
BS 5502 : buildings and structures for agriculture
Part 11 : 1996 : guide to regulations and sources of information
Part 21 : 1990 (1995) : code of practice for selection and use of construction materials
Part 20 : 1990 (1997) : code of practice for general design considerations
Part 22 : 1993 : code of practice for design, construction and loading
Part 23 : 1990 : code of practice for fire precautions
BS 5950 : structural use of steelwork in building
Part 1 : 1990 : code of practice for design in simple and continuous construction : hot rolled sections
Part 3 : section 3.1 : 1990 : design of simple and continuous composite beams
Part 4 : 1994 : code of practice for design of floors with profiled steel sheeting
Part 5 : 1987 : code of practice for design of cold formed sections
Part 6 : 1995 : code of practice for design of light gauge profiled steel sheeting
Part 8 : 1990 : code of practice for fire resistant design
Part 9 : 1994 : code of practice for stressed skin design
BS 5973 : 1993 : access and working scaffolds and special scaffold structures in steel
BS 5975 : 1996 : code of practice for false work
BS 6180 : 1995 : code of practice for barriers in and about buildings
BS 7608 : 1993 : code of practice for fatigue design and assessment of steel structures
BS 8100 : lattice towers and masts
Part 2 : 1986 : guide to the background and use of part 1
Part 4 : 1995 : code of practice for loading of guyed masts
Dd 133 : 1986 : code of practice for strength assessment of members of lattice towers and masts
DD ENV1993 : eurocode 3 : design of steel structures
DD ENV1993-1-1 : 1992 : general rules and rules for buildings (together with uk nad)
DD ENV1994 : eurocode 4 : design of composite steel and concrete structures
DD ENV1994-1-1 : 1994 : general rules and rules for buildings (together with uk nad)
DD ENV1998 : eurocode 8 : design provisions for earthquake resistance of structures
DD ENV1998-1-1 : 1996 : general rules : seismic actions and general requirements for structures
DD ENV1998-1-2 : 1996 : general rules : general rules for buildings
DD ENV1998-1-3 : 1996 : general rules : specific rules for various materials and elements
DD ENV1998-1-4 : 1996 : general rules : strengthening and repair of buildings
DD ENV1998-2 : 1996 : bridges
DD ENV1998-5 : 1996 : foundations, retaining structures and geotechnical aspects
Iso 10721 : steel structures
Iso 10721-1 : 1997 : part 1 : materials and design
(will not be implemented as a British standard. This international standard establishes a common basis for drafting national standards for the use of materials in steel structures and for their design, in order to ensure adequate and consistent measures regarding safety and serviceability).
BS 4604 : specification for the use of high strength friction grip bolts in structural steelwork. Metric series
Part 1 : 1970 : general grade
Part 2 : 1970 : higher grade (parallel shank)
BS 5400 : steel, concrete and composite bridges
Part 6 : 1980 : specification for materials and workmanship, steel
BS 5531 : 1988 : code of practice for safety in erecting structural frames
BS 5950 : structural use of steelwork in building
Part 2 : 1992 : specification for materials, fabrication and erection : hot rolled sections
Part 7 : 1992 : specification for materials and workmanship : cold formed sections
BS 4 : part 1 : 1993 : structural steel sections : specification for hot-rolled sections
BS 449 : specification for the use of structural steel in building
Part 2 : 1969 : metric units
BS 5400 : steel concrete and composite bridges
Part 1 : 1988 : general statement
BS 5493 : 1977 : code of practice for protective coating of iron and steel structures against corrosion
BS 5930 : 1981 : code of practice for site investigations
BS 5950 : structural use of steelwork in building
Part 1 : 1990 : code of practice for design in simple and continuous construction : hot rolled sections
BS 6349 : maritime structures
Part 1 : 1984 : general criteria
BS 8002 : 1994 : code of practice for earth-retaining systems
BS 8004 : 1986 : code of practice for foundations
BS 8081 : 1989 : code of practice for ground anchorages
BS EN 10248 : hot rolled sheet piling of non alloy steels
BS EN 10248-1 : 1996 : technical delivery conditions
BS EN 10248-2 : 1996 : tolerances on shape and dimensions
BS EN 10249 : cold formed sheet piling of non alloy steels
BS EN 10249-1 : 1996 : technical delivery conditions
BS EN 10249-2 : 1996 : tolerances on shape and dimensions
DD ENV1997 : eurocode 7 : geotechnical design
DD ENV1997-1 : 1995 : general rules (together with uk nad)
BS EN ISO 9000 : quality management and quality assurance standards
BS EN ISO 9001 : 1994 : quality systems. Model for quality assurance in design, development, production, installation and servicing
BS EN ISO 9002 : 1994 : quality systems. Model for quality assurance in production, installation and servicing
BS EN ISO 9003 : 1994 : quality systems. Model for quality assurance in final inspection and test
BS EN ISO 9004 : quality management and quality assurance standards
BS EN ISO 9004-1 : 1994 : guidelines